No products in the cart.
Crete Seal Matte is a matte to satin gloss, UV Resistant, non yellowing, 100 percent pure acrylic concrete sealer intended for all types of concrete. Crete Seal Gloss offers improved resistance to rain, the sun, freezing temperatures, stains, and other pollutants that sometimes can be hazardous to concrete. With substrate wetting agents and anti-foaming additives included in this formulation, Crete Seal Matte provides superior adhesion to properly prepared concrete.
Applying Crete Seal Matte to exposed aggregate will also help to eliminate loose pebbles and premature wear. Crete Seal Gloss can be considered an ultimate multi-use concrete sealer.
| TECH SHEETS |  |
|---|---|
| CONTAINER SIZE | 1 Gallon, 5 Gallon |
| COVERAGE RATES | 200-350 Square Feet per Gallon. Depends on concrete porosity, texture or application methods. |
| TYPE | 18% Solids Acrylic Concrete Sealer |
| ODOR | Slight |
| TOXICITY | Harmful if swallowed. Avoid breathing vapors |
| VOC’S | < <700 grams/liter |
| Tack Free | 30 Mins. – 1-Hour |
|---|---|
| Foot Traffic (Light) | 4-6 Hours |
| Heavy Traffic | 24-48 Hours |
| Recoat Window | 4-24 Hours |
SURFACE PREP: Concrete surface must be dean and free of all contaminants and water. Do not apply if rain is forecast within 24 hours. If moisture is present or if the surface is not clean and free of all contaminants. the seater may have white spots and have premature delamination and failure. For cure & seal applications. this product may be applied when damp (not wet) to freshly placed concrete surfaces. Horizontal surfaces must be finished and show no “sheen” from bleed water.
Substrate and air temperature must be no less than 40° f and not exceed 80° F. If applied outside these limits the sealer may not achieve adequate film formation and may have excessive air entrapment, bubbles, blushing or hazing. Note that in direct sunlight. substrate temperature can exceed 150° F which can cause extreme bubbling issues. Low voc solvent based sealers dry faster than traditional 700 voc sealers. Apply on cool. overcast days to avoid issues. Do not apply if the temperature is expected to achieve 85° F or higher.
MIXING: Stir Well before using. Material may separate during long-term storage.
APPLICATION:Apply using a 3/8″ -1/2″ nap roller cover using long even uniform strokes at approximately 250-400 square feet per gallon depending on porosity and texture of substrate, Thick or puddle areas may prevent the solvent from evaporating and may be susceptible to moisture intrusion which may cause milky white spots. Applying too thin may cause sealer to prematurely delaminate, flake or wear away. Allow sealer to dry for 24 hours for light traffic and at least 48 hours for heavy traffic, If applying two coats, wait approximately 4 – 6 hours between coats.
Additional Information
| Weight | 10 lbs |
|---|---|
| Dimensions | N/A |
Question: I have a stamped concrete patio that is a few years old and it is starting to look a little worn and faded how can I reseal this so the stamped concrete looks more like when it rains on it?
Answer: Your patio just needs refreshed with some of our concrete sealer. Crete Seal Gloss is our exterior sealer that is very popular for stamped concrete. You will want to powerwash your concrete, let it dry (at least overnight) and then roll on our Crete Seal Gloss. This will restore your sheen to that “rained on” look 🙂 You can also add “GripX” to the sealer which will add extra foot traction to your stamped concrete surface.