Concrete DNA™ Denisifer LS is a penetrating, reactive treatment for all concrete surfaces. It is a safe, non-flammable and non-toxic treatment that reacts with excess lime in the concrete surface to produce a permanent, hard calcium silicate deposit in the pours making it stronger, more durable, and stain resistant. Lithium silicate is uniquely more effective than sodium or potassium silicates that penetrate less and leave undesirable salts. It also diminishes the Alkali Silicate Reaction (ASR) to improve concrete weathering. UV stable, high shine and resistance to scratch marks. This product is a favorite, used by polishing contractors across the country.
The surface must be clean and dry and free of dirt, oil or other contaminants. Use CitraPro to remove oily contamination and then treat with Super Blue to open the pours and ensure good penetration. This product is also used in conjunction with polishing concrete utilizing our U-Polish-It system and typically applied after the 200 or 400 Satellite Pad.
For best results work at temperatures between 45° F and 100° F. Test a small part of the surface for desired results. New Concrete – Apply with a low pressure sprayer as a single wet coat approximately at 300-400 sq. ft. per gallon. Treated surfaces must stay wet for 15 minutes. Very porous areas may require a second spray during the 15 minute period. Remove any remaining product after 15 minutes by rinsing or squeegee.