Budget Seal | Concrete Floor Supply

Budget Seal System

Out of stock

System Kits

Budget Seal Prepackaged (Up to 800sqft.)

From: $653.50

Out of stock

System Kits

Budget Seal Prepackaged (Up to 1600sqft.)

From: $1,212.00

Out of stock

System Kits

Budget Seal Prepackaged (Up to 3200sqft.)

From: $2,424.00

WHERE TO USE

Garages
Shops
Basements
Restaurants

WHERE TO USE

Low VOC
Durable solid color coating system.
Budget System. Professional grade product.
Easy to install. Dip and roll application
Starting <$.20/sqft.

*This is a rough ball-park price, actual price may vary.

Want to have the exact amount of products for your job?

Simply enter the square footage of your project and the calculator will tell you exactly how much of everything you need!

Please Enter The Total Square Ft For Your Project

Calculate Needed Products

Concrete DNA Diamond Satellite Pads are revolutionizing the way concrete is polished! These pads have diamonds through-out the pad and diamond resin “satellites” to help achieve a nice cut when polishing concrete floors. Use these pads all the way up to polish a floor with a low speed buffer, propane burnisher or auto scrubber. Use our 30 grit for easy prep work prior to sealing, staining, or coating. 1 200 Grit Pad per 2000 sqft.

Super Blue quickly penetrates and dissolves lime deposits, mortar, scale, rust stains, etc. Used during the prep process to clean and remove contaminates, leaving you with the finish you're looking for. 1000 sqFt. per Gallon (Diluted)

Enviroseal, Ez Seal or Ez Seal + E Different sealant options to choose from. 300 sqFeet per Gallon, 2 coats.

EZ Glow Matte or Gloss is a high gloss, non-yellowing acrylic floor polish for use on all types of sealed floors. It not only dries to a high gloss finish but can also be maintained by spray buffing.1000 sqFeet per Gallon

Instructions:

Step 1

Clean with Super Blue and 400 Grit Satellite

Pad or lower.

Step 2

Seal with one of:

Enviroseal (satin, water based)

EZ Seal (gloss, water based)

EZ Seal + E (gloss, water based,

with epoxy infused)

*Minimum two coats of desired sealer.

Step 3